Hull Machine Tools offers both "NEW" and "USED" Machine Tools and Accessories to satisfy your metal cutting and fabricating needs. Listed below are some of our current "Used" and "Demo" Machinery and Tooling values:
Just give us a call at (405) 381-4100 if you have any questions, or if you need any additional information.
Equipment Listings
Used Summit SC VS-242B 3-Axes CNC Vertical Milling Machine
This is a very clean and well maintained CNC Machine being offered for Sale by one of our best customers. Can be seen for “Demo” under Power!…….Shown by appointment in customers shop here in Oklahoma. view detail FAGOR 3-Axes CNC! FAGOR 8040MC 3-Axes CNC, 3HP Motor, Variable Speed, 9” x 49” Table, Automatic Lubrication, Ball…
Used Sutherland MARK-66-1 Press
Can be seen “Under-Power” at Owner’s Facility! 66 Tons, 10HP
Used Trennjaeger Model PMC 8-L Cold Saw
Approx. Specifications (subject to verification): Blade Diameter: 660 mm Max. Traverse of the Blade: 1000 mm Round Bar Capacity: 170 mm Sheet Capacity: 120 x 1000 mm I Capacity: 600 x 220 mm U Capacity: 400 x 110 mm Capacity @ 45 degree in U: 400 x 110 mm Capacity @ 45 in I: 600 x…
Used Wellsaw 1016 Manual Horizontal Bandsaw (Single Phase Electrics!)
Single Phase Electrics! Can be seen “Under-power” in Oklahoma City Shop! Call for pricing: 405-381-4100
Used 2015 Wellsaw 1316S-SA “Mitering” Semi-Automatic Horizontal Bandsaw
MITERING “Semi-Auto” Bandsaw! Can be seen “Under-power” in Oklahoma City Shop! Includes Conveyor! Call for pricing: 405-381-4100
New Aloris Toolholders
“BLOW OUT” Prices!!!! While they Last!!! NEW ALORIS TOOLHOLDERS (Limited Quantities) CA-6 Multiple Toolholder (1 available)…Reg. Price New $ 194.00… “SPECIAL” Price ONLY $ 125.00 CA-7 Universal Parting Blade Toolholder (4 available)…Reg. Price New $ 175.00… “SPECIAL” Price ONLY $ 110.00 ea. CA-8 Threading Toolholder (2 available)…Reg. Price New $ 183.00… “SPECIAL” Price ONLY $ 120.00 ea. CA-42 Boring Bar Holder (1 available)…Reg. Price New $…
New “Take-Off” TAPER ATTACHMENT
Removed from New ACER 1340G Lathe With 0 – 5″ Taper/Ft. and 0 – 13 Degree Angle scales ***Current New Price from Acer is $ 950.00. (SAVE $ 350.00)***
New “Demo” Edwards Coper Notcher (for 100 Ton Edwards Ironworkers)
Reg. Price $ 2,259.00 (f.o.b. Edwards in Minnesota) Only $ 1,450 f.o.b. Tuttle, OK!
Used PressBrake Tooling – Many Punches & Dies to choose from!
Used 3″ DO 90 degree Forming V-Die ~ 16+ ft. long Used 4″ DO 90 degree Forming V-Die ~ 16+ ft. long Used 2″ DO 90 degree Forming V-Die ~ 8 ft. long Misc. 90 degree Forming Punches – various Lengths ( 3 or more to chose from.) Flattening Punch + other Misc. Punches & Dies to…
Used Boye & Emmes Steady Rest
From Boye & Emmes Lathe (Approx. 28 – 32″ Swing) (From Boye & Emmes Manual Lathe ~28-32” Swing) With Roller Tips, ~9-1/2“ dia. capacity, Overall dimensions = ~28“ tall x ~24“ wide, Base Width = ~ 16-3/8“ wide, Approx. 15-1/4“ from outer edge of base to center of v-way groove.
NEW Surplus PressBrake Tooling
One of our good Customers in Oklahoma City purchased the following NEW Tooling from us back in 2021. They have decided they do not actually need this Tooling and are now putting it up for Sale! New 90 degree Forming V-Punch x 10ft. long (with Safety Tang and Flame Hardened) New 90 degree Forming V-Die…
Collets Holders for Warner & Swasey Turret Lathes
Includes the following items: Approx……. 40 each “Metric” ROUND 3-piece Collet “Sets,” 6 each “Inch” 3-piece Collet “Sets” (4 each ROUND – 2 each HEX), 9 each “Partial” Collet Sets, 3 each Eccentric Pusher Pads (part # 5200-1-3/8RNS .109 eccentric), 1 each hardinge 5/8” ROUND-serrated Collet and 9 each Large Collet “Holders” (SEE ADDITIONAL DESCRIPTIVE INFORMATION…
NEW HHT “Take-Off” 4-Jaw Chuck
Unused – Removed from new Summit Lathe NEW “Take-Off” 20” 4-Jaw Chuck with Solid Jaws, ~ 6-1/4” Through Hole, D1-11 mount. This Chuck is unused and was removed from a new Summit Engine Lathe. Also Includes Chuck Wrench.
Used Skinner 12″ 4-Jaw Chuck with Top 2-Pc. Jaws
3″ Thru Hole, Top 2-piece Jaws (Skinner Chuck # 21912-A8-62B)
New “Take-Off” Summit Steady Rest
This is a New Steady Rest that was “removed” from a New 2021yr. Summit 20-4A-series Lathe. The Customer that purchased this New Lathe had no need for a Steady Rest in his Application. It is un-used.
New Atlas 4″ 4-Jaw Chuck
NEW in Box. These Chucks were typically installed on New Atlas Craftsman Lathes. They can be used on other Brands that have a 1”-8 Spindle mount size. Made in England by Atlas.1″-8 Threaded Mount
Used PEXTO 16Ga. x 52″ Hydraulic Shear
Equipped with Manual Back Gauge
Used PEXTO 16Ga. x 52″ Hydraulic Shear
Equipped with Manual Back Gauge
While great care is taken to accurately communicate specifications and information about the “Used” and “Demo” Machines and Accessories we offer, in order to minimize confusion and best communicate a Machine’s or Item’s condition and specifications, a personal visual and mechanical inspection by the Buyer is highly recommended prior to purchase.